Відео

Cheeseburger!!!! I would love to install this in my wife’s sequoia instead of the cheap Amazon garbage phone holder!

Cheeseburger! Thanks for the idea!

CHEEEEEEEESEBURGERRRRR!!!!

Cheeseburger, please!

Cheeseburger

Cheeseburger

CHEEEEEESEBURGERRRRR!!! I've been working trying to get a 3D print made out similar to yours but have yet to get the perfect curvature of the the top of the dash. I ended up just buying a stick on mount, but with the heat wave happening last few weeks it's been peeling/falling off. Thank you for the giveaway opportunity, wish everyone best of luck on this!

Cheeseburger

Cheeseburger

This is such a great and simple design!! Having two mounting options is also a bonus. Well thought out and executed! I’ve kicked around buying one of the other screw mounted options from others out there, but just didn’t really like the design or the idea of drilling through the dash…. at least at first before making sure that I actually like it enough to hard mount it with drilling holes and screwing it down. Well done sir, what else can you come up with?! 😂 CHEESEBURGER!!!

Cheeseburger

Cheeseburger

"Drill option" is a better choice for those wanting to use longer arm supports where "leverage" would need to be considered.

Cheeseburger

Double cheeseburger!!!

This is such a great minimalist design, and I'm SO glad you included a no drill option. Thats been my hangup on the larger dash mounts I've seen

Cheeseburger

CHEESEBURGER!

Cheeseburger

❤❤❤

Cheeseburger

Cheeseburger

Cheeseburger

Cheeseburger

I know this vid is a year old, good job of explaining the need of a pan hard bar. I’m prepping mine to weld and wanted to watch a couple videos to be sure I’m doing it right etc. just wanted to drop kudos/props to the clear drawing explanation for those who may not be as knowledgeable.

Can you share the scan somewhere so i can look at/play with it?

The best video ever for many beginner DIYers. Wish I had watched it before I did my build.

Custom made bracket for the win. Thanks for making this video will be installing a snorkel on my 1st gen Green Tree as well.

You're wrong! Shitty Fusion360 IS NOT free for home use. I was trying to use it, they are, on Customer service line, ONLY talking about money. Autodesk sucks as they've been lying millions of us for years thaf F360 will "allways be free for hobbists and startupers".

Norklin!

Thanks a Million For Posting This Video & Doing What You're Doing! This is the Perfect Reference For Making My Purchase . . . They Should Be Sponsoring You!

So, did you design/build the bumper or is this still work in progress?

I don´t believe the software problem coming from insuffizient memory. I faced the same problems in the past with my 128 GB machine at 18 core CPU and plenty of SSD space. I tend to believe that the problem comes from the type of Nvidia card used in the system.

Love this build. I'm going to mimic this build for my WJ, it is perfect!

RAM upgrades are so damn cheap these day. That should be a must when buying any 3D scanner.

Great video! Thank you! I've been preparing to build a drawer system for my 80 series, I considered adding a pocket for a foldable table but I don't want to lose drawer height for storage. Do you have a link or information about those organizer bins that fit inside your larger drawer? Those look great!

Amazing video mate, thanks a lot! Would be awesome to see you playing around in Fusion 360 while developing a rear bar using the 3d model!

Any update for the Sequoia bumper? I was hoping to see how you developed the CAD in Fusion.

In hopes to lower cost, I’m considering going with a single 1/2” pipe that is 10” long, rather than the H shape. Do you see any disadvantages to that set up? Difference in parts is ~$40

Good content and presentation. More of a how to use video vs a review but valuable information especially after purchasing one. A review video would ideally be more comparative to other purchase options. Thank you!

Einstar died, Creality Otter better…. I say it like an einstar owner((

Nice vid! Definitely helped me out! What resolution scan would you suggest for scanning mounting holes in an engine bay?

Hi, 1st thank you for this amazing video. 2ndly, please make a video of when and how you design the bumper. and i still cant understand how it will be made? like pieces of metal and then weld them togather, or will it be a fiberglass one piece. Please explain a little what can one do after this scaning part. thank you.

Leave the side mesh off... invert the table mesh and pop rivet to the sides

Great video! Quick question, if someone wanted to carpet the sides of this build as well how would you go about that? Would it make more sense to carpet the front back and sides individually and then assemble? Or assemble the whole thing and then attempt to wrap the carpet around?

This scanner is really good compared to its price, I had a creality lizard, then swapped for einstar, it worth. Its stability and tracking reliability is the best.

Great build, was thinking something similar. Definitely gonna check out the rest of your channel!

Hello, very nice video! I'm thinking of getting one of those for a camping van project. Do you think it can handle a scan of the inside of a van? I want the scan as a basis for designing the furniture. Thanks!

Your zero-zero, should be based on the actual level at ride hight. Chassis rails normal are subject to level. 🇦🇺🤜🏼🤛🏼💙😎🍀☮️☮️☮️☮️

Excellent video, finally a real review of a real tool, scanning real projects instead of toy's scanning toy's. ps. I hope your getting paid for the no less than 4 commercial adds interrupting you video content.